Aquaread
Aquaread manufactures a wide range of precise, scientific water testing equipment that is designed for intuitive operation. They specialise in multi parameter water testing equipment and highly precise water level and temperature loggers. Their water testing instruments are suitable for testing groundwater, surface water and waste water. They are made from rugged materials to withstand harsh environmental conditions and all types of water.
AquaPlus
Portable, GPS AquaPlus Optical DO/EC system
The AquaPlus probe is a combined optical dissolved oxygen, electrical conductivity and temperature sensor. Thanks to the built in conductivity sensor, the AquaPlus is able to calculate and automatically compensate DO readings for changes in water salinity.
It’s compact, robust and highly accurate. It also requires very little maintenance to keep it that way. The slim probe is used with its very own GPS DO meter, meaning the location of every datapoint you measure is also recorded.
- Dissolved Oxygen
- Electrical Conductivity
- pH
- ORP
- Total Dissolved Solids
- Resistivity
- Salinity
- Sea Water Specific Gravity
- Temperature
- Dissolved Oxygen
- Turbidity
- Electrical Conductivity
- pH
- ORP
- Total Dissolved Solids
- Resistivity
- Salinity
- Sea Water Specific Gravity
- Temperature
The AP-700 and AP-800 packages represent the
essentials in basic water quality monitoring. Offered as complete packages you
are provided with everything you need to get testing water. Packages include an
Aquaprobe, a GPS Aquameter, a 3 meter cable, accessories and some RapidCal
calibration solution all housed in a neat carry case for easy storage and transport.
AP-700 & AP-800
Multiparameter Probe![]()
Basic Water Monitoring Packages
The AP-2000 is the smaller of our advanced portable multi parameter water monitoring probes. It comes with a range of standard sensors included, it also offers some customisation options that allow you to add even more sensors to the probe. All of our probes are constructed from tough marine grade aluminium that has been hard anodised, making it suitable for use in both fresh and salt waters.
- Optical Dissolved Oxygen
- Electrical Conductivity
- pH
- ORP
- Total Dissolved Solids
- Resistivity
- Salinity
- Sea Water Specific Gravity
- Temperature
The AP-2000 features 2 Auxiliary sockets to allow you to add
further sensors to the probe.
The probe can be used with a variety of cable lengths via the
AquaConn Connectors.
Cables
available in 3, 10, 20 and 30m lengths as standard.
- Optical Dissolved Oxygen
- Electrical Conductivity
- pH
- ORP
- Total Dissolved Solids
- Resistivity
- Salinity
- Sea Water Specific Gravity
- Temperature
- Depth*
The
AP-5000 features 4 Auxiliary sockets to allow you to add further sensors to the
probe. Unlike the AP-2000, these auxiliary ports are unrestricted. This means
that each port can take either an Ion Selective Electrode (ISE) or an optical
sensor. This makes the number of potential sensor combinations vast.
The probe can be used with a variety of cable lengths via the AquaConn Connectors. Cables available in 3, 10, 20 and 30m lengths as standard.
AP-5000 Multiparameter
Probe![]()
Advanced portable multi-parameter Aquaprobe
The
AP-5000 is the larger of our advanced portable multi parameter water monitoring
probes. It comes with a range of standard sensors included, and much like its
smaller counterpart it offers more customisation options that allow you to add
extra sensors to the probe. All of our probes are constructed from tough
marine grade aluminium that has been hard anodised, making it suitable for
use in both fresh and salt waters.
The GPS Aquameter Water
Quality Meter
Handheld device with built in GPS data tagging
The GPS Aquameter is the original handheld water quality meter with built in GPS. The built in GPS receiver allows the meter to record the location of every dataset, meaning you will always know where your data was captured. The meter is designed to be picked up and used by anyone intuitively. It requires no boot up or warm up time and allows you to record data with a single button press.
- Built in GPS receiver to enable location tagging with every data set, view data in Google Earth
- Display of all the parameters being measured; scroll left and right to view
- Record your data set at the touch of a single button, press M+ to record full data set including all parameters, GPS data and calibration data
- New low power auto data logging mode allows automatic data capture for up to 38 days
- Built in air pressure sensor for atmospheric compensation
- Ergonomic curved design sits nice in the hand, with rubber gasket for added grip in wet conditions
- Rugged, metal AquaConn connectors provide extreme durability where its needed most
- AquaLink PC application and USB cable provided with every GPS Aquameter for data management
Bluelink is an adaptor that replaces the Aquameter in your portable monitoring setup. It connects to the end of the Aquaprobes cable, features a rechargeable battery and Bluetooth communications.
The Bluelink app will allow you to view live data from the probe, to calibrate all of the sensors on the probe, to assign the sockets if you have additional sensors fitted to the probe and to automatically log data. It will have all of the features of the Aquameter.
BLUELINK DEVICE
The Bluelink bluetooth water quality monitoring adapter is made from aluminium and carbon fibre and houses a rechargeable battery. The unit also features a barometric pressure sensor for live compensations of the dissolved oxygen and depth measurements.
The internal battery within Bluelink is rechargeable. It is supplied with a USB charging cable meaning it can be charged from your PC, USB wall plug or a portable battery with USB sockets.
The Bluelink module can only be powered with a cable connected to it, preventing the device from draining if left switched on when the cable and probe are disconnected.
BLUELINK Bluetooth Adapter![]()
Use Bluelink to connect your Aquaprobe to a
mobile phone to view data and make calibrations
WHAT SENSOR DO I NEED?
If you're not sure what water quality testing sensor you need, do feel free to contact us to discuss your specific requirements.